Intrusion Sensor Inoperative
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Glass Breakage Sensor Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Theft Deterrent System Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Theft Deterrent |
| 2 |
|
Go to Step 3 | Go to Step 6 |
| 3 | Test cavity 1 of the glass breakage sensor for battery positive voltage. Refer to Circuit Testing
in Wiring Systems. Is battery voltage present? |
Go to Step 4 | Go to Step 7 |
| 4 | Test cavity 6 for continuity to ground. Refer to Circuit Testing
in Wiring Systems. Is continuity to ground present? |
Go to Step 5 | Go to Step 8 |
| 5 | Test cavity 5 for continuity to ground. Refer to Circuit Testing
in Wiring Systems. Is continuity to ground present? |
Go to Step 10 | Go to Step 9 |
| 6 | Repair open or high resistance in the glass breakage sensor supply voltage circuit between cavity 8 of the glass breakage sensor and C6 cavity 9 of the instrument panel fuse block. Refer to Wiring Repairs
in Wiring Systems. Did you complete the repair? |
Go to Step 10 | - |
| 7 | Repair open or high resistance in the glass breakage sensor supply voltage circuit between cavity 1 of the glass breakage sensor and C8 cavity 1 of the Instrument panel fuse block. Refer to Wiring Repairs
in Wiring Systems. Did you complete the repair? |
Go to Step 10 | - |
| 8 | Repair open in the glass breakage sensor ground circuit between cavity 6 of the glass breakage sensor and G201. Refer to Wiring Repairs
in Wiring Systems. Did you complete the repair? |
Go to Step 10 | - |
| 9 | Replace the glass breakage sensor. Did you complete the repair? |
Go to Step 10 | - |
| 10 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |