LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Supplemental Inflatable Restraint System) >> Removal & Installation >> Air Bag Modules >> Removal & Installation (Passenger-side)

Removal & Installation (Passenger-side)

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove access panel from end of passenger-side instrument panel. Remove screw from passenger-side air duct extension. Remove air duct extension. Remove passenger-side air bag module bolts. Remove Instrument Panel Cluster (IPC) trim. Remove nuts from left and right side of passenger-side air bag module. Remove passenger-side air bag module.
  3. To install, reverse removal procedure. Tighten passenger-side air bag module nuts and bolts to specification. See TORQUE SPECIFICATIONS . Activate air bag system.
scientia non olet · About LEMON Manuals