LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Accessory Power Socket) >> Repair Instructions >> Cigar Lighter Housing Replacement - Floor Console >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cigar Lighter Components
    GM844699Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console in Instrument Panel, Gages and Console.
  2. Remove the cigar lighter rear retainer (1) from the cigar element housing (2).
  3. Remove the cigar element (3).
  4. Remove the cigar element housing (2) from the front floor console trim plate by turning counterclockwise 90 degrees and pushing on the back of the element housing (2).