LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Accessory Power Socket) >> Repair Instructions >> Cigar Lighter Housing Replacement - Floor Console >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cigar Lighter Components
    GM844699Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The cigar lighter element housing will not seat correctly if the grooves are not lined up with the grooves on the front floor console trim plate.
  1. Install the cigar lighter element housing (2) to the front floor console trim plate.
  2. Install the cigar lighter housing rear retainer (1) to the cigar element housing (2).
  3. Install the cigar lighter element (3) to the cigar lighter element housing (2).
  4. Install the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals