LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Accessory Power Socket) >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Accessory Power Receptacle
    GM852336Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
  2. Turn the socket in a counter clockwise direction.
  3. Disengage the tab between the socket and cover.
  4. Align the socket with the notch and remove socket assembly.
scientia non olet · About LEMON Manuals