LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Accessory Power Socket) >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Accessory Power Receptacle
    GM852336Courtesy of GENERAL MOTORS CORP.
  1. Align the socket with the notch on the cover, and push in to install.
  2. Install the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals