LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Window Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.
    Fig 1: Liftgate Window Bolts
    GM825438Courtesy of GENERAL MOTORS CORP.
  1. Open the lift gate window (3).
  2. Support the lift gate window (3).
  3. Remove the high mount stoplamp cover. Refer to High Mounted Stop Lamp Replacement in Lighting Systems.
  4. Remove rear wiper arm. Refer to Wiper Arm Replacement - Rear .
  5. Remove wiper motor assembly. Refer to Wiper Motor Replacement - Liftgate .
  6. Remove the 4 bolts (2) from the rear window (3).
  7. Remove the 4 nuts (1) from the rear window hinge (5).
  8. Disconnect the rear washer hose. Refer to Hose Replacement - Rear Window - Washer Pump to Endgate .
  9. Remove the rear window upper outer panel (4).
  10. Remove the lift gate window struts. Refer to Strut Replacement - Liftgate Window  .
    11. Fig 2: Liftgate Window Components
    GM825437Courtesy of GENERAL MOTORS CORP.
  11. Remove the rear window strut bolt (1) and packing (6) from the rear window retainer (5).
  12. Remove the rear window retainer (5) and the packing (4) from the rear window (2).
  13. Remove the 4 nuts (3) and spacers (1) from the rear window (2).
  14. With an assistant, remove the lift gate window (2) from the lift gate window hinges (8).
scientia non olet · About LEMON Manuals