LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Weatherstrip Replacement - Liftgate Window >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate window.
    2. Fig 1: Liftgate Window Weatherstrip
    GM827937Courtesy of GENERAL MOTORS CORP.
  2. Remove the lift gate window struts. Refer to Strut Replacement - Liftgate Window  .
  3. Starting at the corner of the liftgate flange, pull the weather-strip molding from the liftgate.
scientia non olet · About LEMON Manuals