LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Weatherstrip Replacement - Liftgate Window >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Window Weatherstrip
    GM827937Courtesy of GENERAL MOTORS CORP.
  1. Push the ends of the weather-strip onto the liftgate flange corners.
  2. Push the weather-strip molding onto the flange along the entire length of the liftgate.
  3. Install the lift gate window struts. Refer to Strut Replacement - Liftgate Window  .
  4. Close the lift gate window.
scientia non olet · About LEMON Manuals