LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the lift gate.
    2. Fig 1: Trim Panel Components
    GM824680Courtesy of GENERAL MOTORS CORP.
  2. Remove the trim panel lock cover (1).
  3. Remove the service hole trim cover (2) from the liftgate trim panel (4).
  4. Use J 38778  to disengage the fasteners from the trim panel.
  5. Remove the trim panel (4) from the liftgate (3).
scientia non olet · About LEMON Manuals