LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Trim Panel Components
    GM824680Courtesy of GENERAL MOTORS CORP.
  1. Install the trim panel (4) to the lift gate (3).
  2. Install the service hole trim cover (2) to the liftgate trim panel (4).
  3. Install the trim panel lock cover (1) to the lift gate (3).
  4. Close the lift gate.
scientia non olet · About LEMON Manuals