Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Spoiler Plugs, Screws And Washers

Courtesy of GENERAL MOTORS CORP.

Install the mid spoiler to the liftgate by aligning the studs to the liftgate holes.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 4 screws (2) and washers (1) to the left and right sides of the mid spoiler.
Tighten: Tighten the mid spoiler screws to 5 N.m (44 lb in).
Install the 4 inner liftgate plugs (3) to the left and right sides of the liftgate.
Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate .