LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Bumper Fascia
    GM241439Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper in Bumpers.
  2. Remove the quarter outer panel pressure relief valve (1) from the vehicle by releasing the retaining tabs.
scientia non olet · About LEMON Manuals