Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lock Striker And Bolts

Courtesy of GENERAL MOTORS CORP.

Install the lift gate striker (2) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Secure the striker with the 2 bolts (2).
Tighten: Tighten the rear compartment lid lock striker bolts to 11.5 N.m (9 lb ft).
Install the lift gate sill trim plate. Refer to Door Sill Plate Replacement - Liftgate in Interior Trim.