LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lock Cylinder Rod And Nuts
    GM824373Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Remove the endgate trim panel. Refer to Trim Panel Replacement - Liftgate  .
  3. Disconnect the 2 rods (1) from the lock cylinder.
  4. Remove the 2 nuts (3) from the lock cylinder (2).
  5. Remove the endgate lock cylinder (2) from the liftgate.
scientia non olet · About LEMON Manuals