LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Latch Replacement - Liftgate Window >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Window Latch Components
    GM890760Courtesy of GENERAL MOTORS CORP.
  1. Open the lift gate.
  2. Remove the lift gate trim panel. Refer to Trim Panel Replacement - Liftgate  .
  3. Disconnect the window latch electrical connector (2) from the lift gate harness (1).
  4. Remove the window latch electrical connector retainer (3) from the lift gate (4).
  5. Close the lift gate.
    6. Fig 2: Liftgate Window Latch Bolts
    GM890766Courtesy of GENERAL MOTORS CORP.
  6. Open the lift gate window.
  7. Remove the bolts (3) from the rear lift gate window connector (4).
  8. Remove the rear lift gate window connector (4) away from the lift gate (5).
  9. Remove the bolts (2) from the lift gate window latch (1).
  10. Pull lift gate window latch (1) away from lift gate (5) and disconnect the rod from the latch.
scientia non olet · About LEMON Manuals