Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Liftgate Hinge Bolts

Courtesy of GENERAL MOTORS CORP.

Align the hinge with the marks made on the vehicle body.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the hinge retaining nuts.
Tighten: Tighten the liftgate hinge stud nuts to 19.5 N.m (14 lb ft).
Install the headliner. Refer to Headliner Replacement in Interior Trim.
Install the liftgate. Refer to Liftgate Replacement .