LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1338 (Body Rear End) >> Repair Instructions >> Handle Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Handle Components
    GM824937Courtesy of GENERAL MOTORS CORP.
  1. Remove liftgate trim panel. Refer to Trim Panel Replacement - Liftgate  .
  2. Open the liftgate.
  3. Disconnect cable from handle.
  4. Remove the 2 nuts (1) from the liftgate handle (2).
  5. Remove the liftgate handle (2) from the liftgate applique studs (3).
scientia non olet · About LEMON Manuals