LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1336 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Guide Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Window Guide Channel, Bolts And Screws
    GM846805Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear side door trim. Refer to Trim Panel Replacement - Side Rear Door .
  2. Remove the rear water deflector. Refer to Water Deflector Replacement - Rear Door .
  3. Loosen the rubber window run channel along the center guide channel.
  4. Remove the following components from the rear door:
    • The 2 bolts (2)
    • The 2 screws (3)
    • The window guide channel (1)
scientia non olet · About LEMON Manuals