Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Window Switch And Front Side Door Trim

Courtesy of GENERAL MOTORS CORP.

The driver side power door lock switch is part of the power accessory switch panel, to replace. Refer to Power Accessory Switch Panel Replacement .
If removing the passenger side power lock switch, use a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (2) from the front side door trim (1).

Fig 2: Power Window Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the front side door lock switch electrical connector (3).

Fig 3: Power Window, Switch Mounting Plate And Tabs

Courtesy of GENERAL MOTORS CORP.

Remove the front side door lock switch (1) from the mounting plate (3) by releasing the tabs (5).