LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1336 (Door System, Mirror System & Window System) >> Repair Instructions >> Mirror Replacement - Power >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Mirror Components
    GM846409Courtesy of GENERAL MOTORS CORP.
  1. Unclip and remove the inner mirror garnish (6) from the door.
  2. Remove the front side door trim. Refer to Trim Panel Replacement - Side Front Door .
  3. Disconnect the front upper speaker electrical connector (5), if equipped.
  4. Disconnect the outside rearview mirror electrical connector (2).
  5. Remove the following components from the door:
    • The 3 nuts
    • The front upper speaker (3), if equipped.
    • The outside rearview mirror (1)