LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1336 (Door System, Mirror System & Window System) >> Repair Instructions >> Hinge Replacement - Front Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Door Hinge And Bolts
    GM847704Courtesy of GENERAL MOTORS CORP.
  1. Remove the left fender, if necessary. Refer to Fender Replacement - Front - Left in Body Front End.
  2. Remove the right fender, if necessary. Refer to Fender Replacement - Front - Right in Body Front End.
    3. IMPORTANT: Remove only one hinge at a time in order to keep the door properly aligned.
  3. Remove the 2 door to hinge bolts (2 or 4).
  4. Remove the 2 hinge to door jamb bolts (1 or 3).
  5. Remove the upper or lower hinge (6 or 5)) from the vehicle.
scientia non olet · About LEMON Manuals