LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Trim Panel Replacement - Rear Seat Back (Right) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right Rear Seat Back Trim Panel Components
    GM849452Courtesy of GENERAL MOTORS CORP.
  1. Fold down the right rear seat back cushion.
  2. Remove the 2 access panels (3).
  3. Remove the 4 screws (2) from the rear seat back trim panel (4).
  4. Unclip and remove the right rear seat back trim panel (4).
scientia non olet · About LEMON Manuals