LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Trim Panel Replacement - Rear Seat Back (Right) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right Rear Seat Back Trim Panel Components
    GM849452Courtesy of GENERAL MOTORS CORP.
  1. Install the right rear seat back trim panel (4) to the right rear seat back.
  2. Secure the trim panel 4 with the 4 screws (2).
  3. Install the access panels (3) to the trim panel (4).
  4. Return the right rear seat to the up right position.
scientia non olet · About LEMON Manuals