LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold down seat back.
    2. Fig 1: Plastic Hinge Covers, Hinge Bolts, Lower Bolts And Rear Seat
    GM833610Courtesy of GENERAL MOTORS CORP.
  2. Remove the plastic hinge covers (1).
  3. Remove seat back hinge bolts (2).
  4. Remove center seat belt retractor, if necessary. Refer to Seat Belt Retractor Replacement - Center Rear .
  5. Remove the lower bolts (3) from the seat.
  6. Remove the rear seat (4) from the vehicle.
scientia non olet · About LEMON Manuals