LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Cushion Components
    GM849882Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back trim panel. Refer to Trim Panel Replacement - Rear Seat Back (Left)  or Trim Panel Replacement - Rear Seat Back (Right) .
  2. Remove the 2 pivot bolts (2).
  3. Remove the 2 lower mounting bolts (4).
  4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.
scientia non olet · About LEMON Manuals