LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front (Driver Side) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drivers front seat assembly. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat belt buckle. Refer to Seat Belt Buckle Replacement - Left Front in Seat Belts.
  3. Remove the driver seat back assembly. Refer to Seat Back Replacement - Front (Driver Side)  or Seat Back Replacement - Front (Passenger Side) .
    4. Fig 1: Seat Cushion Components
    GM862637Courtesy of GENERAL MOTORS CORP.
  4. Remove the seat cushion cover (1) and cushion (2). Refer to Seat Cushion Cover Replacement - Front .
  5. Remove the 2 screws (4) and the recliner adjuster inside covers (3).
  6. Remove the 2 screws (6) and the lower seat cushion shields (5).
  7. Remove the seat track handle (10).
scientia non olet · About LEMON Manuals