LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Frame Replacement - Front (Driver Side) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Cushion Components
    GM862637Courtesy of GENERAL MOTORS CORP.
  1. Install the seat track handle (10).
  2. Install the lower seat cushion shields (5), and secure with the 2 screws (6).
  3. Install the adjuster inside covers (3) and secure with the 2 screws (4).
  4. Install the seat cushion (2) and cover (1). Refer to Seat Cushion Cover Replacement - Front .
  5. Install the drivers front seat back assembly. Refer to Seat Back Replacement - Front (Driver Side)  or Seat Back Replacement - Front (Passenger Side) .
  6. Install the seat belt buckle. Refer to Seat Belt Buckle Replacement - Left Front in Seat Belts.
  7. Install the drivers front seat assembly. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals