LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Cover and Pad Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cushion Cover
    GM241556Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear .
  2. Remove the plastic retainers which secure the cushion cover (1).
    3. Fig 2: Rear Seat Cushion
    GM241636Courtesy of GENERAL MOTORS CORP.
  3. Cut the hog rings around the bottom perimeter of the rear seat cushion (1).
  4. Remove the rear seat cushion cover from the cushion.
scientia non olet · About LEMON Manuals