LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Cover Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat assembly. Refer to Seat Replacement - Front Bucket .
  2. Remove the adjuster knob clip and adjuster knob, if equipped.
  3. Cut the hog rings (3).
    Fig 1: Seat Cushion Cover And Hog Rings
    GM431903Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the seat cushion:
    • The hog rings (3)
    • The seat cushion cover (1)
  5. Remove the seat cushion pad from the frame, if necessary.
scientia non olet · About LEMON Manuals