LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Cushion Cover Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Cushion Cover And Hog Rings
    GM431903Courtesy of GENERAL MOTORS CORP.
  1. Install the seat cushion pad to the frame, if removed.
  2. Install the seat cushion cover (1) to the seat cushion. Secure the cover with new hog rings (3).
  3. Install the adjuster knob and clip, if removed.
  4. Install the front seat assembly. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals