LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Trim Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Back Trim Panel, Plastic Retainers And Plastic Hooks
    GM863385Courtesy of GENERAL MOTORS CORP.
  1. Install trim panel (1) to the rear seat back, and slide upward until plastic hooks (2) engage.
  2. Press firmly on lower trim panel (1) until lower plastic retainers (3) fasten.