LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Replacement - Front (Driver Side) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Back Components
    GM848802Courtesy of GENERAL MOTORS CORP.
  1. Remove the front seat assembly. Refer to Seat Replacement - Front Bucket .
  2. Remove the front seat head restraint. Refer to Head Restraint Replacement - Front Seat .
  3. Remove the seat adjuster track covers (7). Refer to Seat Adjuster Track Cover Replacement - Front (Outboard)  or Seat Adjuster Track Cover Replacement - Front (Inboard) .
  4. Remove the bolts (3) from the seat back assembly (1).
  5. Remove seat back assembly (1) from the seat adjuster (10).
  6. Remove the driver seat inflatable restraint, if necessary. Refer to Inflatable Restraint Side Impact Module Replacement - LH in SIR.
scientia non olet · About LEMON Manuals