LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back trim panel (3). Refer to Trim Panel Replacement - Rear Seat Back (Left)  or Trim Panel Replacement - Rear Seat Back (Right) .
  2. Remove rear seat latch knob (11) and retainer (10).
  3. Remove the rear seat back cover (6). Refer to Seat Back Cover and Pad - Rear Split Folding .
  4. Remove the 2 bolts (7) from the seat back latch (8).
  5. Remove the seat back latch (8) and rod (9) from the rear seat.
scientia non olet · About LEMON Manuals