LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Release Latch Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back latch (8) and rod (9) to the rear seat.
  2. Install the rear seat back latch bolts (7) to the rear seat back latch.
  3. Install the rear seat back cushion cover (6). Refer to Seat Back Cover and Pad - Rear Split Folding .
  4. Install the seat latch retainer (10) and knob (11).
  5. Install the rear seat back trim panel (3). Refer to Trim Panel Replacement - Rear Seat Back (Left)  or Trim Panel Replacement - Rear Seat Back (Right) .
scientia non olet · About LEMON Manuals