LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Passenger Side Seat Back Components
    GM862943Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back recliner (5) to the seat back assembly (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts (6) to the seat back recliner (5).

    Tighten:  Tighten the bolts (6) to 43 N.m (32 lb ft).

  3. Install the inner and outer seat back recliner trim panels (8). Refer to Seat Back Recliner Outer Trim Panel Replacement - Front Seat  and Seat Back Recliner Inner Trim Panel Replacement - Front Seat .
  4. Install the passenger seat back assembly (1). Refer to Seat Back Replacement - Front (Driver Side)  or Seat Back Replacement - Front (Passenger Side) .
  5. Install the passenger front seat assembly. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals