LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Recliner Inner Trim Panel Replacement - Front Seat >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Passenger Side Seat Back Components
    GM862943Courtesy of GENERAL MOTORS CORP.
  1. Remove front seat assembly. Refer to Seat Replacement - Front Bucket .
  2. Remove the seat adjuster track covers (14). Refer to Seat Adjuster Track Cover Replacement - Front (Outboard)  or Seat Adjuster Track Cover Replacement - Front (Inboard) .
    3. Fig 2: Recliner Handle And Retaining Tab
    GM863383Courtesy of GENERAL MOTORS CORP.
  3. Using a flat-bladed tool, remove the recliner handle (1) from the front seat outboard adjuster by disengaging the retaining tab (2).
    4. Fig 3: Trim Cover, Retaining Tab, Screw
    GM863382Courtesy of GENERAL MOTORS CORP.
  4. Remove the screw (3) from the trim cover (1).
  5. Disengage the retaining tab (2) and slide trim cover (1) upward to remove.
scientia non olet · About LEMON Manuals