LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Recliner Inner Trim Panel Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Trim Cover, Retaining Tab, Screw
    GM863382Courtesy of GENERAL MOTORS CORP.
  1. Install trim cover (1) over recliner, and slide down until tab (2) engages.
  2. Install the screw (3) to the trim cover (1)
    Fig 2: Recliner Handle And Retaining Tab
    GM863383Courtesy of GENERAL MOTORS CORP.
  1. Install the recliner handle (1) to the front seat adjuster by engaging the retaining tab (2).
  2. Install the seat adjuster track covers. Refer to Seat Adjuster Track Cover Replacement - Front (Outboard)  or Seat Adjuster Track Cover Replacement - Front (Inboard) .
  3. Install the front seat assembly. Refer to Seat Replacement - Front Bucket .