LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Install the rear seat back cushion pad (5) and cover (6) to the frame (4). Refer to Seat Back Cover and Pad - Rear Split Folding .
  2. Install the rear seat back cushion. Refer to Seat Back Replacement - Rear Split Folding .
  3. Install the rear seat head restraint (1). Refer to Head Restraint Replacement - Rear Seat .
scientia non olet · About LEMON Manuals