LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat assembly. Refer to Seat Replacement - Front Bucket .
  2. Remove the front seat back cushion cover (1) and pad (2). Refer to Seat Back Cover and Pad Replacement - Front .
  3. Remove the driver seat inflatable restraint, if necessary. Refer to Inflatable Restraint Side Impact Module Replacement - LH in SIR.
  4. Remove the passenger seat inflatable restraint, if necessary. Refer to Inflatable Restraint Side Impact Module Replacement - RH in SIR.
  5. Remove seat back frame (3) from vehicle.
    Fig 1: Front Seat Back Frame Components
    GM863258Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals