LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Frame Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Back Frame Components
    GM863258Courtesy of GENERAL MOTORS CORP.
  1. Install the driver side inflatable restraint, if removed. Refer to Inflatable Restraint Side Impact Module Replacement - LH in SIR.
  2. Install the passenger side inflatable restraint, if removed. Refer to Inflatable Restraint Side Impact Module Replacement - RH in SIR.
  3. Install the front seat back cushion cover (1) and pad (2) to seat back frame (3). Refer to Seat Back Cover and Pad Replacement - Front .
  4. Install the front seat assembly. Refer to Seat Replacement - Front Bucket .
scientia non olet · About LEMON Manuals