LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Cover Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Back Release Latch Components
    GM849131Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back cushion. Refer to Seat Back Replacement - Rear Split Folding .
  2. Remove lock release button (11) and grommet (10).
  3. Remove the head rest supports (2).
    4. Fig 2: Rear Seat Cushion
    GM241636Courtesy of GENERAL MOTORS CORP.
  4. Cut the hog rings around the back perimeter of the rear seat back cushion (1).
  5. Remove the rear seat back cushion cover from the cushion.
scientia non olet · About LEMON Manuals