LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Back Center Pivot Replacement - Rear Folding >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat back cushion. Refer to Seat Back Replacement - Rear Split Folding .
  2. Remove the following components from the vehicle:
    • The 2 bolts (2) that retain the rear seat back cushion center pivot support (1)
    • The rear seat back cushion center pivot support (1)
    Fig 1: Center Pivot Support And Bolts
    GM848941Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals