LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front (Inboard) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Inboard Adjuster Components
    GM830097Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor rear console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
  2. Remove the following components from the front seat inboard adjuster:
    • The 2 screws (1)
    • The inboard adjuster finish cover (4)
scientia non olet · About LEMON Manuals