LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Seat Adjuster Track Cover Replacement - Front (Inboard) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Seat Inboard Adjuster Components
    GM830097Courtesy of GENERAL MOTORS CORP.
  1. Install the inboard adjuster finish cover (4) to the front seat inboard adjuster. Secure the cover with the 2 screws (1).
  2. Install the front floor rear console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals