LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Rear Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Back Cushion, Head Restraint And Tab
    GM431997Courtesy of GENERAL MOTORS CORP.
  1. Install the head rest guides to the seat back cushion (2), if removed.
  2. Align the head restraint posts into the guides.
  3. Push in the tab (3) on the head restraint guide in order to install the head restraint (1). Ensure that the retainer lock engages.
scientia non olet · About LEMON Manuals