LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (Seat System) >> Repair Instructions >> Head Restraint Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Head Restraint, Restraint Guides And Seat Back Cushion
    GM431906Courtesy of GENERAL MOTORS CORP.
  1. Install the head restraint guides to the seat back cushion, if removed.
  2. Push in the tabs (2) on the head restraint guides.
  3. Install the head restraint (1).