LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (Interior Trim) >> Repair Instructions >> Trim Replacement - Hinge Pillar >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Body Hinge Pillar Trim Panel And Plastic Retainer
    GM844139Courtesy of GENERAL MOTORS CORP.
  1. Install the body hinge pillar trim panel (1) to the vehicle. Secure the trim panel with the plastic retainer (2).
  2. Install the front sill plate trim. Refer to Door Sill Plate Replacement  .
scientia non olet · About LEMON Manuals