Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the quarter lower trim panel (4) to the vehicle. Ensure that the plastic retainers (2) are fully engaged.
- Install the tie down hooks (1) and bolts (3) to the trim panel.
- Install the rear storage compartment. Refer to Storage Compartment Replacement - Rear .
- Install the rear tool storage compartment tray. Refer to Tool Storage Compartment Replacement .
- Install the rear body side lower garnish molding. Refer to Garnish Molding Replacement - Body Side Lower Rear .
- Install the lift gate sill trim panel. Refer to Door Sill Plate Replacement - Liftgate .