LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (Interior Trim) >> Repair Instructions >> Tool Storage Compartment Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Trim Panel Components
    GM854674Courtesy of GENERAL MOTORS CORP.
  1. Remove tool storage access panel (8), by turning the knob (9).
  2. Remove the child tether anchors (6). Refer to Child Restraint Tether Anchor Replacement (Upper) in Seat Belts.
  3. Remove the rear accessory panel (1). Refer to Accessory Panel Replacement - Rear  .
  4. Remove the rear storage compartment (3). Refer to Storage Compartment Replacement - Rear  .
  5. Remove the tool storage compartment (4) from the vehicle.
scientia non olet · About LEMON Manuals